Premium Paver Seal

Highest Quality Selection of Sealers & Adhesives

HGX HIGH GLOSS X-TREME

HGX High Gloss X-treme Premium Seal™ is a high-gloss, enhancing, wet-look formula that extends surface life. This high-quality product protects the surface by creating a barrier against elements that stain and deteriorate the appearance, such as rust, dirt, pool chemicals, salt and everyday weathering.

BENEFITS

High-gloss, wet-look finish
Enhances, restores & protects
Solvent based
Minimizes salt and freeze/thaw damage
Provides UV protection
Ideal for high-traffic areas
Breathable

APPLICATIONS

Concrete Pavers
Wetcast
Granite
Marble/Travertine
Limestone

LGX LOW GLOSS X-TREME

LGX Low Gloss X-treme Premium Seal™ is a low gloss, color enhancing formula that extends surface life. This high-quality product protects commercial or high-traffic areas by creating a barrier against elements that stain and deteriorate the appearance, such as rust, dirt, pool chemicals, salt and everyday weathering.

BENEFITS

Low-gloss finish
Enhances, restores & protects
Solvent based
Minimizes salt and freeze/thaw damage
Provides UV protection
Ideal for high-traffic areas
Breathable

APPLICATIONS

Concrete Pavers
Wetcast
Granite
Marble/Travertine
Limestone

Instructions:

CLEAN

Wait 28 days after installing polymeric sand before sealing.
Thoroughly sweep surface of joint sand or loose material.
Spot clean if needed with one of the SRW Specialty Clean™ products. Then, prepare the surface with an SRW Products General Purpose Cleaner.

CLIMATE

After cleaning, wait at least 24 hours before sealing. Surface and joints must be completely dry.
Recommended application temperatures are 50°F – 80°F (10°C – 27°C) from installation through the cure process.
Do not apply if inclement weather is forecasted within 24 hours.

APPLY

STIR THOROUGHLY
Apply with an SRW Products approved Slit Foam Roller and sprayer.
For best results, spray then back roll. This prevents an uneven finish. A 2-person application is recommended.
Start at the highest project elevation. Do not allow sealer to pool on surface or in joints.
Repeat if desired.

CURE

Allow sealed area to dry and cure 24 hours.
Protect area from water and rain until dry.
Dry-tack free: 25 minutes
Foot traffic: 24 hours
Vehicle traffic: 72 hours

Note all calculations based on 68°F-77°F (20°C-25°C)